[vz-users] Dienste laufen, aber vz trotzdem tot..?
Heiko Baumann
hbcs at gmx.de
Wed Nov 25 22:24:31 CET 2015
Vielen Dank für Eure Vorschläge!
@ Christian:
Platz ist genug vorhanden:
pi at BauratPi ~ $ df -h
Dateisystem GröÃe Benutzt Verf. Verw%
Eingehängt auf
rootfs 30G 3,3G 25G 12% /
/dev/root 30G 3,3G 25G 12% /
devtmpfs 235M 0 235M 0% /dev
tmpfs 49M 408K 49M 1% /run
tmpfs 5,0M 0 5,0M 0%
/run/lock
tmpfs 98M 0 98M 0%
/run/shm
/dev/mmcblk0p1 56M 19M 38M 34% /boot
curlftpfs#ftp://ftpssh:harald@192.168.178.1/ 7,5T 0 7,5T 0%
/mnt/ftp_backup
Die Sensoren scheinen mir auch gemountet zu sein:
pi at BauratPi ~ $ mount
/dev/root on / type ext4 (rw,noatime,data=ordered)
devtmpfs on /dev type devtmpfs
(rw,relatime,size=240208k,nr_inodes=60052,mode=755)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=49696k,mode=755)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=99380k)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620)
/dev/mmcblk0p1 on /boot type vfat
(rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro)
OWFS on /mnt/1wire type fuse.OWFS
(rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
curlftpfs#ftp://ftpssh:harald@192.168.178.1/ on /mnt/ftp_backup type
fuse (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other)
Anmerkung: ich boote von SD, root ist auf einer externen Platte.
Ich kann auch in die Verzeichnisse reinschauen, z.B.
pi at BauratPi /mnt/1wire $ ls /mnt/1wire
28.24695C040000 28.7E5C5C040000 28.B963C9040000 alarm system
28.24695C040000 28.876AC9040000 28.C6C7F1040000 bus.0 uncached
28.3F58C9040000 28.876AC9040000 28.D513C9040000 settings
28.3F58C9040000 28.97245D040000 28.D513C9040000 simultaneous
28.5A84A2040000 28.B07E5D040000 28.DE69C9040000 statistics
28.7E46F2040000 28.B963C9040000 28.DE69C9040000 structure
pi at BauratPi /mnt/1wire $ cd 28.24695C040000/
pi at BauratPi /mnt/1wire/28.24695C040000 $ ls
address errata id r_address temperature temperature12 templow
alias family locator r_id temperature10 temperature9 type
crc8 fasttemp power r_locator temperature11 temphigh
Also... soweit alles ok?
@ Udo:
mysql hab ich neu gestartet, keine Änderung
pi at BauratPi ~ $ sudo /etc/init.d/mysql restart
[ ok ] Stopping MySQL database server: mysqld.
[ ok ] Starting MySQL database server: mysqld . . ..
[info] Checking for tables which need an upgrade, are corrupt or were
not closed cleanly..
Bleibt nur noch als letzte Hoffnung:
dmesg zeigt eigentlich nichts auffälliges, außer dass die ds2842 wohl
doch nen Timeout bekommen:
[ 52.705892] i2c i2c-1: new_device: Instantiated device ds2482 at 0x18
[ 52.713375] i2c i2c-1: new_device: Instantiated device ds2482 at 0x19
[ 52.727384] i2c i2c-1: new_device: Instantiated device ds2482 at 0x1a
[96204.675931] ds2482_wait_1wire_idle: timeout on channel 0
[108763.897767] ds2482_wait_1wire_idle: timeout on channel 0
(Im Anhang komplettes Dokument)
Es werden aber gar keine Werte mehr gespeichert, weder s0 noch 1wire.
Wie kann ich das direkt an den Sensoren testen?
Danke!
LG Heiko
-------------- next part --------------
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.25+ (dc4 at dc4-arm-01) (gcc version 4.7.2 201207
31 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: BCM2708
[ 0.000000] cma: CMA: reserved 16 MiB at 1e000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c05cfd6c, node_mem_map c067d000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1680
bcm2708_fb.fbheight=1050 bcm2708.boardrev=0xf bcm2708.serial=0x3ea2e525 smsc95xx
.macaddr=B8:27:EB:A2:E5:25 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_ba
se=0x1fa00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=tty1 root
=/dev/sda2 rootfstype=ext4 elevator=deadline rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 496MB = 496MB total
[ 0.000000] Memory: 480420k/480420k available, 27484k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05727b4 (5546 kB)
[ 0.000000] .init : 0xc0573000 - 0xc0597424 ( 146 kB)
[ 0.000000] .data : 0xc0598000 - 0xc05d0870 ( 227 kB)
[ 0.000000] .bss : 0xc05d0870 - 0xc067c3e0 ( 687 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:330
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.001166] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS lpj=10000)
[ 0.001235] pid_max: default: 32768 minimum: 301
[ 0.001709] Mount-cache hash table entries: 512
[ 0.002521] Initializing cgroup subsys memory
[ 0.002631] Initializing cgroup subsys devices
[ 0.002672] Initializing cgroup subsys freezer
[ 0.002707] Initializing cgroup subsys blkio
[ 0.002868] CPU: Testing write buffer coherency: ok
[ 0.003348] Setting up static identity map for 0xc0406048 - 0xc04060a4
[ 0.005189] devtmpfs: initialized
[ 0.019524] NET: Registered protocol family 16
[ 0.025425] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.026487] bcm2708.uart_clock = 0
[ 0.028225] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.028282] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.028323] mailbox: Broadcom VideoCore Mailbox driver
[ 0.028423] bcm2708_vcio: mailbox at f200b880
[ 0.028531] bcm_power: Broadcom power driver
[ 0.028572] bcm_power_open() -> 0
[ 0.028600] bcm_power_request(0, 8)
[ 0.529322] bcm_mailbox_read -> 00000080, 0
[ 0.529366] bcm_power_request -> 0
[ 0.529595] Serial: AMBA PL011 UART driver
[ 0.529761] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[ 0.552108] bio: create slab <bio-0> at 0
[ 0.553372] SCSI subsystem initialized
[ 0.553615] usbcore: registered new interface driver usbfs
[ 0.553749] usbcore: registered new interface driver hub
[ 0.554056] usbcore: registered new device driver usb
[ 0.555452] Switching to clocksource stc
[ 0.555820] FS-Cache: Loaded
[ 0.556155] CacheFiles: Loaded
[ 0.568978] NET: Registered protocol family 2
[ 0.569983] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.570160] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.570264] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.570370] TCP: reno registered
[ 0.570415] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.570474] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.570926] NET: Registered protocol family 1
[ 0.571517] RPC: Registered named UNIX socket transport module.
[ 0.571583] RPC: Registered udp transport module.
[ 0.571617] RPC: Registered tcp transport module.
[ 0.571650] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.572513] bcm2708_dma: DMA manager at f2007000
[ 0.572652] bcm2708_gpio: bcm2708_gpio_probe c05a5e50
[ 0.573071] vc-mem: phys_addr:0x00000000 mem_base=0x1fa00000 mem_size:0x20000000(512 MiB)
[ 0.574180] audit: initializing netlink socket (disabled)
[ 0.574312] type=2000 audit(0.550:1): initialized
[ 0.732270] VFS: Disk quotas dquot_6.5.2
[ 0.732637] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.734964] FS-Cache: Netfs 'nfs' registered for caching
[ 0.736467] NFS: Registering the id_resolver key type
[ 0.736627] Key type id_resolver registered
[ 0.736668] Key type id_legacy registered
[ 0.737425] msgmni has been set to 970
[ 0.739579] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.739951] io scheduler noop registered
[ 0.740006] io scheduler deadline registered (default)
[ 0.740341] io scheduler cfq registered
[ 0.740659] bcm2708_fb_debugfs_init: could not create debugfs entry
[ 0.741923] BCM2708FB: allocated DMA memory 5e400000
[ 0.742025] BCM2708FB: allocated DMA channel 0 @ f2007000
[ 0.776976] Console: switching to colour frame buffer device 210x65
[ 0.791230] uart-pl011 dev:f1: no DMA platform data
[ 0.792009] vc-cma: Videocore CMA driver
[ 0.792127] vc-cma: vc_cma_base = 0x00000000
[ 0.792233] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 0.792348] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 0.802132] brd: module loaded
[ 0.807864] loop: module loaded
[ 0.808276] vchiq: vchiq_init_state: slot_zero = 0xde000000, is_master = 0
[ 0.809456] Loading iSCSI transport class v2.0-870.
[ 0.810630] usbcore: registered new interface driver smsc95xx
[ 0.810872] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.011204] Core Release: 2.80a
[ 1.011331] Setting default values for core params
[ 1.011472] Finished setting default values for core params
[ 1.211664] Using Buffer DMA mode
[ 1.211775] Periodic Transfer Interrupt Enhancement - disabled
[ 1.211900] Multiprocessor Interrupt Enhancement - disabled
[ 1.212015] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.212119] Dedicated Tx FIFOs mode
[ 1.212783] dwc_otg: Microframe scheduler enabled
[ 1.213032] dwc_otg bcm2708_usb: DWC OTG Controller
[ 1.213219] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 1.213422] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 1.213573] Init: Port Power? op_state=1
[ 1.213666] Init: Power Port (0)
[ 1.213879] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.214034] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.214184] usb usb1: Product: DWC OTG Controller
[ 1.214291] usb usb1: Manufacturer: Linux 3.10.25+ dwc_otg_hcd
[ 1.214411] usb usb1: SerialNumber: bcm2708_usb
[ 1.215333] hub 1-0:1.0: USB hub found
[ 1.219894] hub 1-0:1.0: 1 port detected
[ 1.224594] dwc_otg: FIQ enabled
[ 1.224614] dwc_otg: NAK holdoff enabled
[ 1.224627] dwc_otg: FIQ split fix enabled
[ 1.224648] Module dwc_common_port init
[ 1.225122] usbcore: registered new interface driver usb-storage
[ 1.230016] mousedev: PS/2 mouse device common for all mice
[ 1.235044] bcm2835-cpufreq: min=700000 max=900000 cur=700000
[ 1.239674] bcm2835-cpufreq: switching to governor powersave
[ 1.244027] bcm2835-cpufreq: switching to governor powersave
[ 1.248412] cpuidle: using governor ladder
[ 1.252740] cpuidle: using governor menu
[ 1.257075] sdhci: Secure Digital Host Controller Interface driver
[ 1.261358] sdhci: Copyright(c) Pierre Ossman
[ 1.265694] sdhci: Enable low-latency mode
[ 1.315666] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[ 1.320361] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[ 1.324757] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.329226] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.335868] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.347828] usbcore: registered new interface driver usbhid
[ 1.352263] usbhid: USB HID core driver
[ 1.361268] TCP: cubic registered
[ 1.367733] Initializing XFRM netlink socket
[ 1.374147] NET: Registered protocol family 17
[ 1.378715] Key type dns_resolver registered
[ 1.386618] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 1.395172] registered taskstats version 1
[ 1.400189] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.405354] Waiting for root device /dev/sda2...
[ 1.415794] Indeed it is in host mode hprt0 = 00021501
[ 1.487934] mmc0: read SD Status register (SSR) after 4 attempts
[ 1.498560] mmc0: new high speed SDHC card at address aaaa
[ 1.515829] mmcblk0: mmc0:aaaa SU32G 29.7 GiB
[ 1.521972] mmcblk0: p1 p2
[ 1.635609] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.640295] Indeed it is in host mode hprt0 = 00001101
[ 1.836341] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 1.840985] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.846731] hub 1-1:1.0: USB hub found
[ 1.851545] hub 1-1:1.0: 3 ports detected
[ 2.135853] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.256404] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.261000] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.268511] smsc95xx v1.0.4
[ 2.333719] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:a2:e5:25
[ 2.415765] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 2.556255] usb 1-1.2: New USB device found, idVendor=0c0b, idProduct=b159
[ 2.561037] usb 1-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2.565725] usb 1-1.2: Product: External HDD
[ 2.570418] usb 1-1.2: Manufacturer: DMI
[ 2.574987] usb 1-1.2: SerialNumber: 00EE98D1
[ 2.582389] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 2.587893] scsi0 : usb-storage 1-1.2:1.0
[ 2.685799] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
[ 2.813010] usb 1-1.3: New USB device found, idVendor=03eb, idProduct=3301
[ 2.817820] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.822513] usb 1-1.3: Product: Standard USB Hub
[ 2.832593] hub 1-1.3:1.0: USB hub found
[ 2.838763] hub 1-1.3:1.0: 4 ports detected
[ 3.126291] usb 1-1.3.4: new low-speed USB device number 6 using dwc_otg
[ 3.239069] usb 1-1.3.4: New USB device found, idVendor=046d, idProduct=c505
[ 3.243848] usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.248557] usb 1-1.3.4: Product: USB Receiver
[ 3.253251] usb 1-1.3.4: Manufacturer: Logitech
[ 3.269217] input: Logitech USB Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.0/input/input0
[ 3.274759] hid-generic 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-bcm2708_usb-1.3.4/input0
[ 3.300113] input: Logitech USB Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.1/input/input1
[ 3.306097] hid-generic 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-bcm2708_usb-1.3.4/input1
[ 3.595707] scsi 0:0:0:0: Direct-Access SAMSUNG HD103UJ PQ: 0 ANSI: 2
[ 3.603001] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.611580] sd 0:0:0:0: [sda] Write Protect is off
[ 3.617116] sd 0:0:0:0: [sda] Mode Sense: 38 00 00 00
[ 3.619479] sd 0:0:0:0: [sda] No Caching mode page found
[ 3.624835] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 3.636712] sd 0:0:0:0: [sda] No Caching mode page found
[ 3.642048] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9.896800] sda: sda1 sda2
[ 9.909684] sd 0:0:0:0: [sda] No Caching mode page found
[ 9.914974] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9.920266] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.959075] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 9.964494] VFS: Mounted root (ext4 filesystem) on device 8:2.
[ 9.988672] devtmpfs: mounted
[ 9.994621] Freeing unused kernel memory: 144K (c0573000 - c0597000)
[ 12.119557] udevd[159]: starting version 175
[ 14.465507] bcm2708-i2s bcm2708-i2s.0: Failed to create debugfs directory
[ 19.363516] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 20.132268] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 21.141036] bcm2708_i2c_init_pinmode(0,0)
[ 21.153640] bcm2708_i2c_init_pinmode(0,1)
[ 21.162900] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100000)
[ 21.176127] bcm2708_i2c_init_pinmode(1,2)
[ 21.187974] bcm2708_i2c_init_pinmode(1,3)
[ 21.199283] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
[ 21.334902] i2c /dev entries driver
[ 21.465248] Driver for 1-wire Dallas network protocol.
[ 30.542868] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 32.061682] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 33.478755] bcm2835-cpufreq: switching to governor ondemand
[ 33.478789] bcm2835-cpufreq: switching to governor ondemand
[ 38.448649] Adding 102396k swap on /var/swap. Priority:-1 extents:129 across:1754856k FS
[ 45.855743] sd 0:0:0:0: [sda] Unhandled sense code
[ 45.855785] sd 0:0:0:0: [sda]
[ 45.855801] Result: hostbyte=0x00 driverbyte=0x08
[ 45.855817] sd 0:0:0:0: [sda]
[ 45.855829] Sense Key : 0x3 [current]
[ 45.855853] sd 0:0:0:0: [sda]
[ 45.855865] ASC=0x11 ASCQ=0x0
[ 45.855881] sd 0:0:0:0: [sda] CDB:
[ 45.855896] cdb[0]=0x28: 28 00 00 16 e6 f0 00 00 88 00
[ 45.855935] end_request: critical target error, dev sda, sector 1500912
[ 47.115495] sd 0:0:0:0: [sda] Unhandled sense code
[ 47.115602] sd 0:0:0:0: [sda]
[ 47.115622] Result: hostbyte=0x00 driverbyte=0x08
[ 47.115640] sd 0:0:0:0: [sda]
[ 47.115652] Sense Key : 0x3 [current]
[ 47.115675] sd 0:0:0:0: [sda]
[ 47.115690] ASC=0x11 ASCQ=0x0
[ 47.115707] sd 0:0:0:0: [sda] CDB:
[ 47.115719] cdb[0]=0x28: 28 00 00 16 e7 50 00 00 08 00
[ 47.115758] end_request: critical target error, dev sda, sector 1501008
[ 52.665748] fuse init (API version 7.22)
[ 52.705892] i2c i2c-1: new_device: Instantiated device ds2482 at 0x18
[ 52.713375] i2c i2c-1: new_device: Instantiated device ds2482 at 0x19
[ 52.727384] i2c i2c-1: new_device: Instantiated device ds2482 at 0x1a
[96204.675931] ds2482_wait_1wire_idle: timeout on channel 0
[108763.897767] ds2482_wait_1wire_idle: timeout on channel 0
pi at BauratPi ~ $
More information about the volkszaehler-users
mailing list