[vz-users] Neueinrichtung Easymeter Q3D-Zähler

Thomas Hümmerich thomas.huemmerich at arcor.de
Sat Jan 2 19:43:02 CET 2016


Hallo,nothing to plot - hier die Daten dazu:
cat /dev/ttyUSB0 liefert:
1-0:1.8.0*255(0000xxx.xx*kWh)
1-0:2.8.0*255(000xxx.xx*kWh)
1-0:21.7.0*255(000xx.xx*W)
1-0:41.7.0*255(000xxx.xx*W)
1-0:61.7.0*255(000xxx.xx*W)
1-0:1.7.0*255(000xxx.xx*W)
1-0:96.5.5*255(80)
Also lege ich im Frontend an:2 Mal El. Energie (Zählerstände) für die Zählerstände Verbrauch und Lieferung4 Mal El. Energie (Leistungswerte) für die Leistung der 3 Phasen und die Gesamtleistung
Muss man 96.5.5 auch einrichten?
Hier Auszüge aus der daraus entstandenen CONFIG:{  "retry": 30,  "daemon": false,  "verbosity": 15,  "log": "/var/log/vzlogger.log",  "push": [],  "local": {    "enabled": false,    "port": 8080,    "index": true,    "timeout": 30,    "buffer": 600  },  "meters": [    {      "enabled": true,      "allowskip": false,      "interval": 10,      "aggtime": -1,      "aggfixedinterval": false,      "channels": [        {          "uuid": "608995d0-b139-11e5-a1ec-d95b72cab6b6",          "identifier": "1-0: 1.8.0",          "api": "volkszaehler",          "middleware": "http://localhost/middleware.php",          "secretKey": "",          "type": "device",          "scaler": 1,          "aggmode": "max",          "duplicates": 0        }      ],      "protocol": "d0",      "device": "/dev/ttyUSB0",      "host": "",      "dump_file": "",      "pullseq": "",      "ackseq": "auto",      "baudrate": 9600,      "baudrate_read": 300,      "parity": "7e1",      "wait_sync": "off",      "read_timeout": 10,      "baudrate_change_delay": 0,      "gpio": -1,      "mmap": "",      "gpio_dir": -1,      "configureGPIO": true,      "resolution": 1000,      "send_zero": false,      "debounce_delay": 30,      "nonblocking_delay": 100000    },    {      "enabled": true,      "allowskip": false,      "interval": 10,      "aggtime": -1,      "aggfixedinterval": false,      "channels": [        {          "uuid": "5457c240-b139-11e5-9771-fdb30fb5759c",          "identifier": "1-0: 2.8.0",          "api": "volkszaehler",          "middleware": "http://localhost/middleware.php",          "secretKey": "",          "type": "device",          "scaler": 1,          "aggmode": "max",          "duplicates": 0        }      ],      "protocol": "d0",      "device": "/dev/ttyUSB0",      "host": "",      "dump_file": "",      "pullseq": "",      "ackseq": "auto",      "baudrate": 9600,      "baudrate_read": 300,      "parity": "7e1",      "wait_sync": "off",      "read_timeout": 10,      "baudrate_change_delay": 0,      "gpio": -1,      "mmap": "",      "gpio_dir": -1,      "configureGPIO": true,      "resolution": 1000,      "send_zero": false,      "debounce_delay": 30,      "nonblocking_delay": 100000    },    {      "enabled": true,      "allowskip": false,      "interval": 10,      "aggtime": -1,      "aggfixedinterval": false,      "channels": [        {          "uuid": "731ef1c0-b139-11e5-91c9-17c1aec912ff",          "identifier": "1-0: 21.7.0",          "api": "volkszaehler",          "middleware": "http://localhost/middleware.php",          "secretKey": "",          "type": "device",          "scaler": 1,          "aggmode": "avg",          "duplicates": 0        }      ],      "protocol": "d0",      "device": "/dev/ttyUSB0",      "host": "",      "dump_file": "",      "pullseq": "",      "ackseq": "auto",      "baudrate": 9600,      "baudrate_read": 300,      "parity": "7e1",      "wait_sync": "off",      "read_timeout": 10,      "baudrate_change_delay": 0    },
Auszug aus der LOG-Datei:
[Jan 02 19:26:41]       Opened logfile /var/log/vzlogger.log[Jan 02 19:26:41][push] pushdata_thread created.[Jan 02 19:26:41][push] [Jan 02 19:26:41][]     Start push_data_thread===> Start meters
[Jan 02 19:26:41][s0]   counter_thread created[Jan 02 19:26:41][mtr0] Meter connection established[Jan 02 19:26:41][s0]   Counter thread started with blocking hwif[Jan 02 19:26:41][S0]   MeterS0:HWIF_GPIO:first poll returned 1[Jan 02 19:26:41][mtr0] Meter thread started[Jan 02 19:26:41][mtr0] Meter is opened. Starting channels.[Jan 02 19:26:41][chn0] Logging thread started[Jan 02 19:26:41][chn0] Start logging thread for volkszaehler-api. Running as daemon: yes[Jan 02 19:26:41][chn0] Using default volkszaehler api.[Jan 02 19:26:41][s0]   counter_thread created[Jan 02 19:26:41][mtr1] Meter connection established[Jan 02 19:26:41][mtr1] Meter thread started[Jan 02 19:26:41][mtr1] Meter is opened. Starting channels.[Jan 02 19:26:41][chn1] Logging thread started[Jan 02 19:26:41][s0]   Counter thread started with blocking hwif[Jan 02 19:26:41][S0]   MeterS0:HWIF_GPIO:first poll returned 1[Jan 02 19:26:41][mtr0] Number of readers: 4[Jan 02 19:26:41][mtr0] Config.daemon: 1[Jan 02 19:26:41][mtr0] Config.local: 0[Jan 02 19:26:41][mtr1] Number of readers: 4[Jan 02 19:26:41][mtr1] Config.daemon: 1[Jan 02 19:26:41][mtr1] Config.local: 0[Jan 02 19:26:41][chn1] Start logging thread for volkszaehler-api. Running as daemon: yes[Jan 02 19:26:41][chn1] Using default volkszaehler api.[Jan 02 19:26:41][s0]   counter_thread created[Jan 02 19:26:41][mtr2] Meter connection established[Jan 02 19:26:41][mtr2] Meter thread started[Jan 02 19:26:41][mtr2] Meter is opened. Starting channels.[Jan 02 19:26:41][chn2] Logging thread started[Jan 02 19:26:41][s0]   Counter thread started with blocking hwif[Jan 02 19:26:41][S0]   MeterS0:HWIF_GPIO:first poll returned 1[Jan 02 19:26:41][chn2] Start logging thread for volkszaehler-api. Running as daemon: yes[Jan 02 19:26:41][chn2] Using default volkszaehler api.[Jan 02 19:26:41][mtr2] Number of readers: 4[Jan 02 19:26:41][mtr2] Config.daemon: 1[Jan 02 19:26:41][mtr2] Config.local: 0[Jan 02 19:26:41][s0]   Counter thread started with blocking hwif[Jan 02 19:26:41][S0]   MeterS0:HWIF_GPIO:first poll returned 1[Jan 02 19:26:41][s0]   counter_thread created[Jan 02 19:26:41][mtr3] Meter connection established[Jan 02 19:26:41][mtr3] Meter thread started[Jan 02 19:26:41][mtr3] Meter is opened. Starting channels.[Jan 02 19:26:41][mtr3] Number of readers: 4[Jan 02 19:26:41][mtr3] Config.daemon: 1[Jan 02 19:26:41][mtr3] Config.local: 0[Jan 02 19:26:41][chn3] Logging thread started[Jan 02 19:26:41][chn3] Start logging thread for volkszaehler-api. Running as daemon: yes[Jan 02 19:26:41][chn3] Using default volkszaehler api.[Jan 02 19:26:41][s0]   counter_thread created[Jan 02 19:26:41][mtr4] Meter connection established[Jan 02 19:26:41][mtr4] Meter thread started[Jan 02 19:26:41][mtr4] Meter is opened. Starting channels.[Jan 02 19:26:41][chn4] Logging thread started[Jan 02 19:26:41][s0]   counter_thread created[Jan 02 19:26:41][mtr5] Meter connection established[Jan 02 19:26:41][mtr5] Meter thread started[Jan 02 19:26:41][mtr5] Meter is opened. Starting channels.[Jan 02 19:26:41][chn5] Logging thread started[Jan 02 19:26:41][mtr4] Number of readers: 4[Jan 02 19:26:41][mtr4] Config.daemon: 1[Jan 02 19:26:41][mtr4] Config.local: 0[Jan 02 19:26:41][s0]   Counter thread started with blocking hwif[Jan 02 19:26:41][S0]   MeterS0:HWIF_GPIO:first poll returned 1[Jan 02 19:26:41][w1t]  scanW1devices failed![Jan 02 19:26:41][mtr6] Cannot open meter[Jan 02 19:26:41][]     Startup failed: Meter open failed.
Im Log steht S0, ich habe aber doch D0 -  wie in der Doku zum Q3D beschrieben - eingerichtet?
Weiß jemand bitte Rat?
Danke und Gruß,Thomas
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20160102/b8aca8cc/attachment-0001.html>


More information about the volkszaehler-users mailing list