[vz-users] mit Ferraris USB Auslesekopf teilweise falsche Werte

[Peter Gerlach]

direkt unter /etc/
Andere Änderungen werden übernommen, falls die Frage in diese Richtung
gehen sollte.


Am 28.01.2016 um 21:39 schrieb Andreas Götz:
> Wo liegt deine vzlogger.conf?
>
>> Am 28.01.2016 um 21:28 schrieb Peter Gerlach <p.gerlach at web.de>:
>>
>> Die Settings sind jetzt:
>> "aggtime" : -1
>> "aggmode" : "NONE"
>>
>> Ich seh da keinen Unterschied im Log:
>>
>> [Jan 28 21:20:55][chn0] Adding reading to queue (value=1.00
>> ts=1454012454330)
>> [Jan 28 21:20:56][chn0] Adding reading to queue (value=6.00
>> ts=1454012456058)
>> [Jan 28 21:20:57][chn0] Adding reading to queue (value=3.00
>> ts=1454012456999)
>> [Jan 28 21:20:58][chn0] Adding reading to queue (value=1.00
>> ts=1454012457908)
>> [Jan 28 21:20:59][chn0] Adding reading to queue (value=6.00
>> ts=1454012458752)
>> [Jan 28 21:21:00][chn0] Adding reading to queue (value=1.00
>> ts=1454012459387)
>> [Jan 28 21:21:01][chn0] Adding reading to queue (value=6.00
>> ts=1454012461049)
>> [Jan 28 21:21:02][chn0] Adding reading to queue (value=2.00
>> ts=1454012461831)
>> [Jan 28 21:21:03][chn0] Adding reading to queue (value=1.00
>> ts=1454012462795)
>> [Jan 28 21:21:04][chn0] Adding reading to queue (value=6.00
>> ts=1454012463638)
>> [Jan 28 21:21:05][chn0] Adding reading to queue (value=1.00
>> ts=1454012464273)
>> [Jan 28 21:21:06][chn0] Adding reading to queue (value=7.00
>> ts=1454012466083)
>> [Jan 28 21:21:07][chn0] Adding reading to queue (value=1.00
>> ts=1454012466720)
>> [Jan 28 21:21:08][chn0] Adding reading to queue (value=1.00
>> ts=1454012467689)
>> [Jan 28 21:21:09][chn0] Adding reading to queue (value=6.00
>> ts=1454012468536)
>> [Jan 28 21:21:10][chn0] Adding reading to queue (value=1.00
>> ts=1454012469174)
>> [Jan 28 21:21:11][chn0] Adding reading to queue (value=7.00
>> ts=1454012470987)
>> [Jan 28 21:21:12][chn0] Adding reading to queue (value=1.00
>> ts=1454012471625)
>> [Jan 28 21:21:13][chn0] Adding reading to queue (value=2.00
>> ts=1454012473012)
>> [Jan 28 21:21:14][chn0] Adding reading to queue (value=6.00
>> ts=1454012474079)
>> [Jan 28 21:21:15][chn0] Adding reading to queue (value=1.00
>> ts=1454012475047)
>> [Jan 28 21:21:16][chn0] Adding reading to queue (value=6.00
>> ts=1454012475892)
>> [Jan 28 21:21:17][chn0] Adding reading to queue (value=1.00
>> ts=1454012476530)
>> [Jan 28 21:21:18][chn0] Adding reading to queue (value=3.00
>> ts=1454012478026)
>> [Jan 28 21:21:19][chn0] Adding reading to queue (value=5.00
>> ts=1454012478983)
>> [Jan 28 21:21:20][chn0] Adding reading to queue (value=1.00
>> ts=1454012479952)
>> [Jan 28 21:21:21][chn0] Adding reading to queue (value=6.00
>> ts=1454012480799)
>> [Jan 28 21:21:22][chn0] Adding reading to queue (value=1.00
>> ts=1454012481437)
>> [Jan 28 21:21:23][chn0] Adding reading to queue (value=6.00
>> ts=1454012483105)
>> [Jan 28 21:21:24][chn0] Adding reading to queue (value=2.00
>> ts=1454012483890)
>> [Jan 28 21:21:25][chn0] Adding reading to queue (value=1.00
>> ts=1454012484861)
>> [Jan 28 21:21:26][chn0] Adding reading to queue (value=6.00
>> ts=1454012485708)
>> [Jan 28 21:21:27][chn0] Adding reading to queue (value=1.00
>> ts=1454012486347)
>> [Jan 28 21:21:28][chn0] Adding reading to queue (value=6.00
>> ts=1454012488015)
>> [Jan 28 21:21:29][chn0] Adding reading to queue (value=2.00
>> ts=1454012488801)
>> [Jan 28 21:21:30][chn0] Adding reading to queue (value=1.00
>> ts=1454012489771)
>> [Jan 28 21:21:31][chn0] Adding reading to queue (value=6.00
>> ts=1454012490618)
>>
>> Gruß
>> Peter
>>
>>> Am 28.01.2016 um 21:03 schrieb Udo1:
>>>> Am 28.01.2016 um 19:56 schrieb Peter Gerlach:
>>>> Was mich wundert, ist der unterschiedliche Wert von 'value' im
>>>> Sekundenabstand in den Logeinträgen.
>>> Setz mal aggmode auf none.
>>> Wie sieht dann die .log aus?
>>>
>>> Gruß
>>> Udo