[vz-users] Hilfe bei Zählerwechsel und alte Volkszähler-Hardware

Sat May 4 11:28:01 CEST 2019

Moin Marcus,

am ehesten wüsste möglicherweise Udo etwas über den Yport. Ich bin mir aber
nicht sicher, ob er hier noch mitliest, die letzten Wochen hat man nix von
ihm gehört/gelesen.
Ich würde es vielleicht mal auf einen Versuch ankommen lassen und ihn
direkt anschreiben. Die Adresse findest du vielfach im ML-Archiv.

Grüße
Frank

Marcus Wilkens <marcus.wilkens at scharrendorf.de> schrieb am Sa., 4. Mai
2019, 10:41:

> Hallo Frank
> und Danke für deine Einschätzung.
>
> Sehr Schade daß meine schönes Volkszählerprojekt nach 8 Jahren so enden
> muss. Auf einen Rasberry zu migrieren macht leider aus meiner Sicht keinen
> Sinn.
>
> Ich wünsche allen Beteiligten weiterhin gutes Gelingen.
>
> in der Kürze liegt die Würze ...
>
> -------- Ursprüngliche Nachricht --------
> Von: Frank Richter <frank.richter83 at gmail.com>
> Datum: 04.05.19 01:50 (GMT+01:00)
> An: "volkszaehler.org - users" <volkszaehler-users at demo.volkszaehler.org>
> Betreff: Re: [vz-users] Hilfe bei Zählerwechsel und alte
> Volkszähler-Hardware
>
> Hallo Marcus,
>
> ich befürchte, die hier derzeit aktiven Teilnehmer haben leider keine
> Erfahrung mit der Y-Port-Hardware u. Software.
>
> Viele Grüße
> Frank
>
>
> Marcus Wilkens <marcus.wilkens at scharrendorf.de> schrieb am Fr., 3. Mai
> 2019 18:13:
>
>> Hallo Forenteilnehmer,
>>
>> ich bin mir nicht ganz sicher ob ich mich irgendwie falsch verhalten habe
>> aber ist es normal das hier keiner antwortet?
>> Sofern meine Hardware zu alt ist und man sich nur mit aktueller Hardware
>> beschäftigen möchte wäre das auch OK ... sofern man mir es mitteilt.
>>
>> Am 14.04.2019 um 10:39 schrieb Marcus Wilkens:
>>
>> Hallo liebes Support-Team,
>> ich habe ein Anliegen und hoffe das es nicht zu frech wirkt.
>> Mein Bekannter und ich betreiben seit mehreren Jahren ein YPORT-Node mit
>> YPORT-Node S0-Erweiterung ohne Beanstandungen (Configs weiter unten) ...
>> hierfür noch einmal ein Lob an alle Projektbeteiligten.
>>
>> Durch einen Zählerwechsel *von* Itron ACE3000 Type 260 *auf* Logarex
>> LK13BE803039 haben sich nun die beiden Schnittstellen (Y und ZPORT)
>> geändert. Auf beiden Ports wird nun 9600 8N1 gesprochen.
>> Alle Versuche, mit meinen laienhaften Linux Kenntnissen eine neue
>> Firmware zu erstellen, scheiterten. Selbst der UP- und DOWNLOAD mit TFTPD64
>> (Crossoverkabel) enden bei Block 0.
>> Meine Frage ... könnt ihr mir die passende Firmware zur Verfügung
>> stellen? Gerne komme ich für anfallende Kosten auf.
>>
>> Tschö ... Marcus Wilkens
>>
>> *Config-Wilkens*
>> CONFIG_EXPERIMENTAL=y CONFIG_EXPERT=y ARCH=ARCH_AVR ARCH_AVR=y
>> MCU=atmega1284p atmega1284p=y FREQ=12500000
>> HARDWARE=user_Volkszaehler_YPORT_Node user_Volkszaehler_YPORT_Node=y
>> BOOTLOADER_START_ADDRESS=0x1e000 BOOTLOADER_JUMP=y
>> BOOTLOADER_WORDS=4096 VERSION_STRING_CHOICE=USE_RELEASE_VERSION
>> USE_RELEASE_VERSION=y VERSION_GIT="835b972" DEBUG_BAUDRATE=115200
>> VFS_SUPPORT=y VFS_INLINE_SUPPORT=y CONFIG_INLINE_SUPPORT=y
>> VFS_CONFIG_INLINE_SUPPORT=y VFS_INLINE_INLINESVG_SUPPORT=y
>> VFS_INLINE_HTML_CLEAN_SUPPORT=y SD_READ_TIMEOUT=y
>> CONF_HOSTNAME="Wilkens_YPORT_ZPORT" NET_MAX_FRAME_LENGTH=1500
>> ENC28J60_SUPPORT=y CONF_ENC_MAC="ac:de:48:1c:d8:8e"
>> CONF_ENC_IP="192.168.178.12" CONF_ENC_IP4_NETMASK="255.255.255.0"
>> ETHERNET_SUPPORT=y CONF_TAP_MAC="ac:de:48:fd:0f:d0"
>> CONF_TAP_IP="192.168.23.244" CONF_TAP_IP4_NETMASK="255.255.255.0"
>> CONF_TAP_LOCALIP="192.168.23.1" CONF_RFM12_FREQ=RFM12_FREQ_433920
>> RFM12_FREQ_433920=y CONF_RFM12_BAUD=19200 CONF_RFM12_IP="192.168.5.1"
>> CONF_RFM12_IP4_NETMASK="255.255.255.0" UIP_SUPPORT=y NET_SUPPORT=y
>> IPV4_SUPPORT=y CONF_ETHERRAPE_GATEWAY="192.168.178.1" TCP_SUPPORT=y
>> UDP_SUPPORT=y BROADCAST_SUPPORT=y ICMP_SUPPORT=y DNS_SUPPORT=y
>> CONF_DNS_SERVER="192.168.178.1"
>> CONF_OPENVPN_KEY=00000000000000000000000000000000
>> CONF_OPENVPN_HMAC_KEY=00000000000000000000000000000000
>> CONF_OPENVPN_IP="0.0.0.0" CONF_OPENVPN_IP4_NETMASK="255.255.255.0"
>> CONF_OPENVPN_PORT=1194 PORTIO_SCHEME=PORTIO_FULL_FEATURED
>> PORTIO_FULL_FEATURED=y PORTIO_SUPPORT=y TTY_COLS=16 TTY_LINES=4
>> HC595_REGISTERS=5 HC165_REGISTERS=1 CONFIG_ADC_AREF=y ADC_REF=ADC_AREF
>> SMS_USART_0=y SMS_USE_USART=0 CONF_LTC1257_NUM_DEVICES=4
>> DC3840_USART_0=y DC3840_USE_USART=0 CONF_FS20_SERVICE="merkur"
>> CONF_FS20_PORT=2701 CONF_RC5_SERVER="192.168.100.3" PWM_SERVOS=1
>> CONF_NUM_BUTTONS= MCUF_USART_0=y MCUF_USE_USART=0
>> CONF_MCUF_SCROLLTEXT_STARTUP="Hi I am your ethersex ;-) "
>> CONF_MCUF_SCROLLTEXT_STARTUP_COLOR=240
>> CONF_MCUF_SCROLLTEXT_STARTUP_BG_COLOR=1
>> CONF_MCUF_SCROLLTEXT_STARTUP_SPEED=2
>> MCUF_MODUL_DISPLAY_MODE_CRON=MCUF_MODUL_DISPLAY_MODE_CRON_RANDOM
>> MCUF_MODUL_DISPLAY_MODE_CRON_RANDOM=y
>> MCUF_MODUL_DISPLAY_MODE=MCUF_MODUL_DISPLAY_MODE_RANDOM
>> MCUF_MODUL_DISPLAY_MODE_RANDOM=y NET_MAX_FRAME_LENGTH_GT_571=y
>> CONF_ARTNET_PORT=6454 CONF_ARTNET_INUNIVERSE=1
>> CONF_ARTNET_OUTUNIVERSE=0 DMX_OUTPUT_UNIVERSE=1 DMX_USART_0=y
>> DMX_USE_USART=0 ECMD_PARSER_SUPPORT=y ECMD_TCP_SUPPORT=y
>> ECMD_TCP_PORT=2701 FNORDLICHT_BAUDRATE=19200 CONF_FNORDLICHTER=1
>> CONF_HTTPLOG_SERVICE="volkszaehler.org"
>> CONF_HTTPLOG_PATH="/httplog/httplog.php"
>> CONF_HTTPLOG_UUID="12345678-9ABC-DEF0-1234-56789ABCDEF0"
>> HTTPLOG_BUFFER_LEN=140 CONF_IRC_IP="192.168.23.254" CONF_IRC_PORT=6667
>> CONF_IRC_CHANNEL="ethersex" CONF_IRC_USERNAME="ethersex"
>> CONF_IRC_NICKNAME="ethersex" CONF_IRC_REALNAME="Ethersex Wollmilchsau"
>> CONF_MYSQL_IP="192.168.23.254" CONF_MYSQL_USERNAME="root"
>> CONF_MYSQL_PASSWORD="password" CONF_MYSQL_SCHEMA="mavisdb"
>> CONF_NETSTAT_SERVICE_IP="188.40.33.175"
>> CONF_NETSTAT_SERVICE="ethersex.de" CONF_NETSTAT_API="/~habo/stat/"
>> CONF_SENDMAIL_IP="78.47.210.246"
>> CONF_SENDMAIL_FROM="root at sex.metafnord.de" <root at sex.metafnord.de>
>> CONF_SENDMAIL_TO="stesie at brokenpipe.de" <stesie at brokenpipe.de>
>> CONF_SMS77_SERVICE="gateway.sms77.de" CONF_SMS77_USER=""
>> CONF_SMS77_PASS="" CONF_SMS77_TO=""
>> CONF_SMS77_TYPE_CHOICE=CONF_SMS77_TYPE_BASICPLUS
>> CONF_SMS77_TYPE_BASICPLUS=y CONF_SMS77_TYPE="basicplus"
>> CONF_SYSLOG_SERVER="192.168.178.91" CONF_TWITTER_SERVICE="identi.ca"
>> CONF_TWITTER_API="/api" CONF_TWITTER_USERNAME="ethersex"
>> CONF_TWITTER_PASSWORD="" CONF_TWITTER_AUTH="ZXRoZXJzZXg6"
>> CONF_USTREAM_IP="205.188.234.7" CONF_USTREAM_PORT=80 YPORT_SUPPORT=y
>> YPORT_USART_1=y YPORT_USE_USART=1 YPORT_PORT=7970 YPORT_BAUDRATE=300
>> YPORT_USART_MODE=YPORT_USE_7E1 YPORT_USE_7E1=y YPORT_BUFFER_LEN=511
>> ZPORT_SUPPORT=y ZPORT_USART_0=y ZPORT_USE_USART=0 ZPORT_PORT=7980
>> ZPORT_BAUDRATE=300 ZPORT_USART_MODE=ZPORT_USE_7E1 ZPORT_USE_7E1=y
>> ZPORT_BUFFER_LEN=511 MSR1_USART_0=y MSR1_USE_USART=0 TO1_USART_0=y
>> TO1_USE_USART=0 TO1_SENSOR_COUNT=1 SERIAL_LINE_LOG_TIMEOUT=20
>> SERIAL_LINE_LOG_EOL=0A SERIAL_LINE_LOG_COUNT=60
>> SERIAL_LINE_LOG_BAUDRATE=9600 NMEA_USART_0=y NMEA_USE_USART=0
>> UDP_STELLA_PORT=2702 UDP_IO_PORT=2703 UDP_MOTORCURTAIN_PORT=2704
>> CW_WPM=12 CLOCK_SUPPORT=y CLOCK_DATETIME_SUPPORT=y TZ_OFFSET=60
>> DST_OFFSET=60 DST_BEGIN_MONTH=3 DST_BEGIN_WEEK=5 DST_BEGIN_DOW=0
>> DST_BEGIN_HOUR=2 DST_END_MONTH=10 DST_END_WEEK=5 DST_END_DOW=0
>> DST_END_HOUR=3 CLOCK_CRYSTAL_SUPPORT=y CLOCK_NTP_ADJUST_SUPPORT=y
>> NTP_SUPPORT=y NTP_SERVER="ptbtime1.ptb.de" NTP_PORT=123
>> NTP_QUERY_INTERVAL=1800 DMX_STORAGE_UNIVERSES=2
>> DMX_STORAGE_CHANNELS=64 DMX_STORAGE_SLOTS=5 DMX_FXSLOT_AMOUNT=4
>> CONF_MOTD_DEFAULT="empty" CONF_MOTD_SIZE=50 HTTPD_SUPPORT=y
>> HTTPD_PORT=80 HTTPD_ALTERNATE_PORT=8000 CONF_JABBER_IP="78.47.210.246"
>> CONF_JABBER_HOSTNAME="jabber.zerties.org" CONF_JABBER_USERNAME="esex"
>> CONF_JABBER_PASSWORD="password" CONF_JABBER_RESOURCE="ethersex"
>> CONF_JABBER_BUDDY="stesie at jabber.zerties.org" <stesie at jabber.zerties.org>
>> MOODLIGHT_CHANGEGAP_INIT=120 STELLA_FREQ=stella_normal stella_normal=y
>> STELLA_START=stella_start_zero stella_start_zero=y
>> STELLA_FADE_STEP_INIT=10 STELLA_FADE_FUNCTION_INIT=stella_fade_func_0
>> stella_fade_func_0=y CONF_UPNP_MULTICAST_IP="239.255.255.250"
>> CONF_UPNP_SCHEME_FILENAME="/ih.xml" VNC_PORT=5900
>> CONF_WATCHASYNC_SERVER="volkszaehler.org" CONF_WATCHASYNC_PORT=80
>> CONF_WATCHASYNC_METHOD="POST"
>> CONF_WATCHASYNC_PATH="/middleware.php/data/"
>> CONF_WATCHASYNC_END_PATH="000" CONF_WATCHASYNC_TIMESTAMP=y
>> CONF_WATCHASYNC_TIMESTAMP_PATH=".json?ts="
>> CONF_WATCHASYNC_RESOLUTION=1 CONF_WATCHASYNC_BUFFERSIZE=64
>> CONF_WATCHASYNC_PA3=y
>> CONF_WATCHASYNC_PA3_ID="840ae6c0-f834-4713-12c1-5117abc94f38"
>> CONF_WATCHASYNC_PA4=y
>> CONF_WATCHASYNC_PA4_ID="a4b917e5-cf83-b88f-fae9-7930b10ae24e"
>> CONF_WATCHASYNC_PA5=y
>> CONF_WATCHASYNC_PA5_ID="d43770a8-0cda-938d-f4cd-9de803c02097"
>> CONF_SENSOR_PSU="1015ccf501080065" CONF_SENSOR_AIR="10567cf501080006"
>> CONF_SENSOR_RAM="10cba7f5010800d3" CONF_LOME6_POD=0
>> CONF_TIME2PRESS_RESET=40 CONF_TIME2PRESS_POWER=40
>> CONF_TIME2PRESS_POWERL=3 FREQCOUNT_CHANNELS=1 FREQCOUNT_AVERAGE=8
>> USART_SUPPORT=y IPV4_SUPPORT=y # git id: commit
>> 835b972652dd4f72d85c668599767c0331258f41 # compile date: Tue Jan 7
>> 11:18:22 PST 2014 # gcc version: gcc version 4.5.3 (GCC) # ld version:
>> GNU ld (GNU Binutils) 2.20.1.20100303
>>
>> *Config-Döpkens*
>> CONFIG_EXPERIMENTAL=y CONFIG_EXPERT=y ARCH=ARCH_AVR ARCH_AVR=y
>> MCU=atmega1284p atmega1284p=y FREQ=12500000
>> HARDWARE=user_Volkszaehler_YPORT_Node user_Volkszaehler_YPORT_Node=y
>> BOOTLOADER_START_ADDRESS=0x1e000 BOOTLOADER_JUMP=y BOOTLOADER_WORDS=4096
>> VERSION_STRING_CHOICE=USE_RELEASE_VERSION USE_RELEASE_VERSION=y
>> VERSION_GIT="835b972" DEBUG_BAUDRATE=115200 VFS_SUPPORT=y
>> VFS_INLINE_SUPPORT=y CONFIG_INLINE_SUPPORT=y VFS_CONFIG_INLINE_SUPPORT=y
>> VFS_INLINE_INLINESVG_SUPPORT=y VFS_INLINE_HTML_CLEAN_SUPPORT=y
>> SD_READ_TIMEOUT=y CONF_HOSTNAME="Doepkens_YPORT"
>> NET_MAX_FRAME_LENGTH=1500 ENC28J60_SUPPORT=y
>> CONF_ENC_MAC="ac:de:48:77:10:15" CONF_ENC_IP="192.168.0.15"
>> CONF_ENC_IP4_NETMASK="255.255.255.0" ETHERNET_SUPPORT=y
>> CONF_TAP_MAC="ac:de:48:fd:0f:d0" CONF_TAP_IP="192.168.23.244"
>> CONF_TAP_IP4_NETMASK="255.255.255.0" CONF_TAP_LOCALIP="192.168.23.1"
>> CONF_RFM12_FREQ=RFM12_FREQ_433920 RFM12_FREQ_433920=y
>> CONF_RFM12_BAUD=19200 CONF_RFM12_IP="192.168.5.1"
>> CONF_RFM12_IP4_NETMASK="255.255.255.0" UIP_SUPPORT=y NET_SUPPORT=y
>> IPV4_SUPPORT=y CONF_ETHERRAPE_GATEWAY="192.168.0.1" TCP_SUPPORT=y
>> UDP_SUPPORT=y BROADCAST_SUPPORT=y ICMP_SUPPORT=y DNS_SUPPORT=y
>> CONF_DNS_SERVER="192.168.0.1"
>> CONF_OPENVPN_KEY=00000000000000000000000000000000
>> CONF_OPENVPN_HMAC_KEY=00000000000000000000000000000000
>> CONF_OPENVPN_IP="0.0.0.0" CONF_OPENVPN_IP4_NETMASK="255.255.255.0"
>> CONF_OPENVPN_PORT=1194 PORTIO_SCHEME=PORTIO_FULL_FEATURED
>> PORTIO_FULL_FEATURED=y PORTIO_SUPPORT=y TTY_COLS=16 TTY_LINES=4
>> HC595_REGISTERS=5 HC165_REGISTERS=1 CONFIG_ADC_AREF=y ADC_REF=ADC_AREF
>> SMS_USART_0=y SMS_USE_USART=0 CONF_LTC1257_NUM_DEVICES=4
>> DC3840_USART_0=y DC3840_USE_USART=0 CONF_FS20_SERVICE="merkur"
>> CONF_FS20_PORT=2701 CONF_RC5_SERVER="192.168.100.3" PWM_SERVOS=1
>> CONF_NUM_BUTTONS= MCUF_USART_0=y MCUF_USE_USART=0
>> CONF_MCUF_SCROLLTEXT_STARTUP="Hi I am your ethersex ;-) "
>> CONF_MCUF_SCROLLTEXT_STARTUP_COLOR=240
>> CONF_MCUF_SCROLLTEXT_STARTUP_BG_COLOR=1
>> CONF_MCUF_SCROLLTEXT_STARTUP_SPEED=2
>> MCUF_MODUL_DISPLAY_MODE_CRON=MCUF_MODUL_DISPLAY_MODE_CRON_RANDOM
>> MCUF_MODUL_DISPLAY_MODE_CRON_RANDOM=y
>> MCUF_MODUL_DISPLAY_MODE=MCUF_MODUL_DISPLAY_MODE_RANDOM
>> MCUF_MODUL_DISPLAY_MODE_RANDOM=y NET_MAX_FRAME_LENGTH_GT_571=y
>> CONF_ARTNET_PORT=6454 CONF_ARTNET_INUNIVERSE=1 CONF_ARTNET_OUTUNIVERSE=0
>> DMX_OUTPUT_UNIVERSE=1 DMX_USART_0=y DMX_USE_USART=0
>> ECMD_PARSER_SUPPORT=y ECMD_TCP_SUPPORT=y ECMD_TCP_PORT=2701
>> FNORDLICHT_BAUDRATE=19200 CONF_FNORDLICHTER=1
>> CONF_HTTPLOG_SERVICE="volkszaehler.org"
>> CONF_HTTPLOG_PATH="/httplog/httplog.php"
>> CONF_HTTPLOG_UUID="12345678-9ABC-DEF0-1234-56789ABCDEF0"
>> HTTPLOG_BUFFER_LEN=140 CONF_IRC_IP="192.168.23.254" CONF_IRC_PORT=6667
>> CONF_IRC_CHANNEL="ethersex" CONF_IRC_USERNAME="ethersex"
>> CONF_IRC_NICKNAME="ethersex" CONF_IRC_REALNAME="Ethersex Wollmilchsau"
>> CONF_MYSQL_IP="192.168.23.254" CONF_MYSQL_USERNAME="root"
>> CONF_MYSQL_PASSWORD="password" CONF_MYSQL_SCHEMA="mavisdb"
>> CONF_NETSTAT_SERVICE_IP="188.40.33.175"
>> CONF_NETSTAT_SERVICE="ethersex.de" CONF_NETSTAT_API="/~habo/stat/"
>> CONF_SENDMAIL_IP="78.47.210.246"
>> CONF_SENDMAIL_FROM="root at sex.metafnord.de" <root at sex.metafnord.de>
>> CONF_SENDMAIL_TO="stesie at brokenpipe.de" <stesie at brokenpipe.de>
>> CONF_SMS77_SERVICE="gateway.sms77.de" CONF_SMS77_USER=""
>> CONF_SMS77_PASS="" CONF_SMS77_TO=""
>> CONF_SMS77_TYPE_CHOICE=CONF_SMS77_TYPE_BASICPLUS
>> CONF_SMS77_TYPE_BASICPLUS=y CONF_SMS77_TYPE="basicplus"
>> CONF_SYSLOG_SERVER="192.168.178.91" CONF_TWITTER_SERVICE="identi.ca"
>> CONF_TWITTER_API="/api" CONF_TWITTER_USERNAME="ethersex"
>> CONF_TWITTER_PASSWORD="" CONF_TWITTER_AUTH="ZXRoZXJzZXg6"
>> CONF_USTREAM_IP="205.188.234.7" CONF_USTREAM_PORT=80 YPORT_SUPPORT=y
>> YPORT_USART_1=y YPORT_USE_USART=1 YPORT_PORT=7970 YPORT_BAUDRATE=9600
>> YPORT_USART_MODE=YPORT_USE_8N1 YPORT_USE_8N1=y YPORT_BUFFER_LEN=511
>> ZPORT_SUPPORT=y ZPORT_USART_0=y ZPORT_USE_USART=0 ZPORT_PORT=7980
>> ZPORT_BAUDRATE=300 ZPORT_USART_MODE=ZPORT_USE_7E1 ZPORT_USE_7E1=y
>> ZPORT_BUFFER_LEN=511 MSR1_USART_0=y MSR1_USE_USART=0 TO1_USART_0=y
>> TO1_USE_USART=0 TO1_SENSOR_COUNT=1 SERIAL_LINE_LOG_TIMEOUT=20
>> SERIAL_LINE_LOG_EOL=0A SERIAL_LINE_LOG_COUNT=60
>> SERIAL_LINE_LOG_BAUDRATE=9600 NMEA_USART_0=y NMEA_USE_USART=0
>> UDP_STELLA_PORT=2702 UDP_IO_PORT=2703 UDP_MOTORCURTAIN_PORT=2704
>> CW_WPM=12 CLOCK_SUPPORT=y CLOCK_DATETIME_SUPPORT=y TZ_OFFSET=60
>> DST_OFFSET=60 DST_BEGIN_MONTH=3 DST_BEGIN_WEEK=5 DST_BEGIN_DOW=0
>> DST_BEGIN_HOUR=2 DST_END_MONTH=10 DST_END_WEEK=5 DST_END_DOW=0
>> DST_END_HOUR=3 CLOCK_CRYSTAL_SUPPORT=y CLOCK_NTP_ADJUST_SUPPORT=y
>> NTP_SUPPORT=y NTP_SERVER="ptbtime1.ptb.de" NTP_PORT=123
>> NTP_QUERY_INTERVAL=1800 DMX_STORAGE_UNIVERSES=2 DMX_STORAGE_CHANNELS=64
>> DMX_STORAGE_SLOTS=5 DMX_FXSLOT_AMOUNT=4 CONF_MOTD_DEFAULT="empty"
>> CONF_MOTD_SIZE=50 HTTPD_SUPPORT=y HTTPD_PORT=80
>> HTTPD_ALTERNATE_PORT=8000 CONF_JABBER_IP="78.47.210.246"
>> CONF_JABBER_HOSTNAME="jabber.zerties.org" CONF_JABBER_USERNAME="esex"
>> CONF_JABBER_PASSWORD="password" CONF_JABBER_RESOURCE="ethersex"
>> CONF_JABBER_BUDDY="stesie at jabber.zerties.org" <stesie at jabber.zerties.org>
>> MOODLIGHT_CHANGEGAP_INIT=120 STELLA_FREQ=stella_normal stella_normal=y
>> STELLA_START=stella_start_zero stella_start_zero=y
>> STELLA_FADE_STEP_INIT=10 STELLA_FADE_FUNCTION_INIT=stella_fade_func_0
>> stella_fade_func_0=y CONF_UPNP_MULTICAST_IP="239.255.255.250"
>> CONF_UPNP_SCHEME_FILENAME="/ih.xml" VNC_PORT=5900
>> CONF_WATCHASYNC_SERVER="Frischke" CONF_WATCHASYNC_PORT=1338
>> CONF_WATCHASYNC_METHOD="POST"
>> CONF_WATCHASYNC_PATH="/middleware.php/data/" CONF_WATCHASYNC_END_PATH=""
>> CONF_WATCHASYNC_TIMESTAMP=y CONF_WATCHASYNC_TIMESTAMP_PATH=".json?ts="
>> CONF_WATCHASYNC_RESOLUTION=1 CONF_WATCHASYNC_SUMMARIZE=y
>> CONF_WATCHASYNC_SUMMARIZE_PATH="000&value="
>> CONF_WATCHASYNC_COUNTERRANGE=CONF_WATCHASYNC_16BITS
>> CONF_WATCHASYNC_16BITS=y CONF_WATCHASYNC_BUFFERSIZE=64
>> CONF_WATCHASYNC_PA3=y
>> CONF_WATCHASYNC_PA3_ID="03e219ae-47d1-cf5b-aabc-aa24703a22d8"
>> CONF_WATCHASYNC_PA4=y
>> CONF_WATCHASYNC_PA4_ID="91722365-3674-a389-0d3c-975eaf0e71d9"
>> CONF_WATCHASYNC_PA5=y
>> CONF_WATCHASYNC_PA5_ID="1baa214d-fdc1-7513-9189-b0fa6f1a0491"
>> CONF_SENSOR_PSU="1015ccf501080065" CONF_SENSOR_AIR="10567cf501080006"
>> CONF_SENSOR_RAM="10cba7f5010800d3" CONF_LOME6_POD=0
>> CONF_TIME2PRESS_RESET=40 CONF_TIME2PRESS_POWER=40
>> CONF_TIME2PRESS_POWERL=3 FREQCOUNT_CHANNELS=1 FREQCOUNT_AVERAGE=8
>> USART_SUPPORT=y IPV4_SUPPORT=y # git id: commit
>> 835b972652dd4f72d85c668599767c0331258f41 # compile date: Sun Feb 16
>> 06:49:17 PST 2014 # gcc version: gcc version 4.5.3 (GCC) # ld version:
>> GNU ld (GNU Binutils) 2.20.1.20100303
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20190504/a6dcf2d9/attachment-0001.html>